Honda CR-V manuals

Honda CR-V: Cylinder Head

Honda CR-V (2006–2011) Service Manual / Engine Mechanical / Cylinder Head

Special Tools

Honda CR-V. Cylinder Head

Honda CR-V. Cylinder Head

  1. Air Pressure Regulator
  2. Valve Guide Reamer, 5.5 mm
  3. Socket, 19 mm
  4. Holder Handle
  5. Adjuster
  6. Locknut Wrench
  7. Stem Seal Driver
  8. VTEC Air Adapter
  9. VTEC Air Stopper
  10. Air Joint Adapter
  11. Crankshaft Pulley Holder
  12. Valve Guide Driver, 5.5 mm
  13. Attachment, 52 x 55 mm
  14. Driver
  15. Valve Spring Compressor Attachment

Component Location Index

Honda CR-V. Cylinder Head

Honda CR-V. Cylinder Head

Honda CR-V. Cylinder Head

READ NEXT:

 Engine Compression Inspection

NOTE: After this inspection, you must reset the powertrain control module (PCM), otherwise the PCM will continue to stop the injectors from functioning. Select PCM reset using the Honda Diagnostic Sy

 Valve Clearance Adjustment

Special Tools Required Adjuster 07MAA-PR70110 Locknut wrench 07MAA-PR70120 NOTE: Adjust the valves only when the cylinder head temperature is less than 100 ºF (38 ºC). 1. Remove the cylinder hea

 Cam Chain Removal

NOTE: Keep the cam chain away from magnetic fields. 1. Remove the front wheels. 2. Remove the splash shield (see step 21). 3. Remove the drive belt. 4. Remove the cylinder head cover. 5. Set the N

SEE MORE:

 Low Oil Pressure Indicator

Low Oil Pressure Indicator This indicator should never come on when the engine is running. If it starts flashing or stays on, the oil pressure has dropped very low or lost pressure. Serious engine damage is possible, and you should take immediate action. Running the engine with l

 Tire Pressure Sensor Replacement

Removal 1. Raise the vehicle, and support it with safety stands in the proper locations. 2. Remove the wheel with the faulty sensor. 3. Remove the tire valve cap and the valve core, and let the tire deflate. 4. Remove any balance weights, and then break the bead loose from the wheel with a comme

© 2016-2025 Copyright www.hcrv.net